SKT Page Builder

Home Forums Gravida Support SKT Page Builder

Viewing 15 posts - 1 through 15 (of 35 total)
  • Author
    Posts
  • #122741
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    Is it possible to text from a word file in the text field of the SKT Page Builder to copy, now I need the word for Word types?

    https://imgur.com/OkjtebN

    Admin:
    Kor
    m7tGHlTCc%TE#pBC)M5pDpE1

    Regards,
    Kor

    #122743
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    Yes of course, it is possible, you can copy text from word file and paste in text field of the SKT Page Builder.

    Regards,
    Dave

    #122755
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi Dave,

    I thought so too. I have tried it several times, however it is possible to copy and paste a text only, no text will be displayed.

    At the Title I manage that though.

    You can watch what’s going on is why this is not possible? It is the page Rosacea where I am working on. The header “BOOK YOUR TREATMENT for ROSACEA” works to copy. Copy the following text into the text field does not work

    “Let your rosacea. Book a treatment and as a nurse, I’ll give you after an intake and skin analysis personal advice for the best treatment for your skin. ”

    What needs to be done so that it is not at every page I’m going to make is going to be a problem with the Page Builder?

    Regards,
    Kor

    #122756
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    I’ve found more tried and tested!

    To the Call to action the same story. In the header, I can copy and paste text in the discription.

    Start now to believe that this problem with every possible that the builder provides occurs where text/discription.

    #122776
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    Can you send us the screenshot of your issues?

    Regards,
    Dave

    #122778
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    For example, the page https://www.mlbeauty.nl/huidproblemen__trashed/couperose/. However this is not to create each page.

    As you can see the box content empty and I can not text/copy in discription see image. By the way, is that when all the blocks as to choose from, such as cta and testimonials for example.

    https://imgur.com/NOdgfzS
    https://imgur.com/UsqJJRH

    Kun je hiermee uit de voeten?

    Regards,
    Kor

    #122817
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    Q. As you can see the box content empty and I can not text/copy in discription see image?

    Ans: We checked, this is working properly. We copied the text from the text file and pasted it in the text field of page builder, so that was working.

    Regards,
    Dave

    #122833
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    I’ve just tried again but to me it is not. Snap is really nothing at all from that works with you and with me not. War is now the option? There is a possibility that someone with me watching remotely?

    Regards,
    Kor

    #122913
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi Dave,

    I still have the problems mentioned above with copy and paste text by means of control (C) and control V.

    #122930
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    We checked again, and it is working fine.

    Regards,
    Dave

    #122934
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    That’s typical Dave, with me not, I should now all texts in the SKT Builder manually add them one by one, there I not happy of costs an enormous amount of time. How you copy the text then? This differs with the way I do control C and control V. Is different yet another way available to let you sense that it really doesn’t gives me? have you also tested in my area?

    Regards,
    Kor

    #122939
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    Okay, can you make a video of this issue? and send us.

    Regards,
    Dave

    #122944
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    hi,

    Hi,

    Hi,

    I think I know war it at me. I can copy text in a field in the builder only if it has a purple background as the picture. The text field/description that is not hence it fails to me. You can adjust that to me? then it is solved

    https://imgur.com/9VP675v

    #122945
    Kor van de BuntKor van de Bunt
    Participant
    • Topics: 113
    • Replies: 337
    • Total: 450
    Member since: June 3, 2015

    Hi,

    The header with the purple background, I can copy and paste text!

    regards,
    Kor

    #122946
    Sonl SinhaSonl Sinha
    Moderator
    • Topics: 0
    • Replies: 31022
    • Total: 31022
    Member since: August 16, 2013

    Hi,

    We copied text in header and paste into the text field.

    Have a look at:
    https://imgur.com/a/fAbvny5

    Regards,
    Dave

Viewing 15 posts - 1 through 15 (of 35 total)
  • You must be logged in to reply to this topic.