SKT FishingVersion: pro6.0 – SKT Builder Not Working

Home › Forums › All Other Themes › SKT FishingVersion: pro6.0 – SKT Builder Not Working

Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #237334
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    https://www.flyfishmaine.com/

    The SKT Builder was working fine until yesterday. I tried to get into work on the site’s home page, and it loads to 100%, but then it just sits on this screen.

    https://ibb.co/FkkNqrBs

    How do I repair this? I cannot get around it unless I strip a bunch of code from the page.

    I have cleared the cache and tried logging in to the page in two different browsers. I even tried it on my cell phone, and it has the same error.

    #237357
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    Kindly send us your URL of the site and WordPress admin details (Username & Password) via email:[email protected] Please mention this forum URL while replying so that we understand what needs to be done.

    We’ll check and revert back to you.

    Regards,
    Brad

    #237368
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    Sent information

    #237375
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    Demo content has been successfully imported onto the website.

    But hbs file does not supported on your server. Kindly make these changes below:

    For IIS Server ::

    Add Below code in Web.config

    <system.webServer>
    …
    <staticContent>
    <mimeMap fileExtension=”.hbs” mimeType=”text/x-handlebars-template” />
    </staticContent>
    </system.webServer>
    =========================
    Please go to cPanel >> Advanced >> MIME Types

    File Extension: hbs
    MIME type: text/x-handlebars-template

    http://i.imgur.com/YE3wL3g.png

    Also kindly ask your server to enable ::

    npm install hbs
    npm i express-handlebars

    Regards,
    Brad

    #237386
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    https://ibb.co/mFhTz3MB

    I still can not edit this page. I will request that the changes be completed above.

    I need to update this page, but this issue prevents me from editing it. Is there a way to get around this to make simple updates (text)?

    Is there any way to convert this page to Elementor? The SKT Builder has never worked well.

    #237394
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    We checked the homepage and confirmed that it is editable using SKT Builder. Please clear your browser cache and try editing the page again. You can refer to the screenshot here: https://tinyurl.com/25la2p2z

    Regards,
    Brad

    #237670
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    I have upgraded the PHP to 8.4.16, and now the SKT Builder gets to 85% and just stays there.

    I have cleared out my cache and tried on two different browsers with no luck.

    I need some help to repair this issue.

    #237682
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    Builder never reaches 100%. It stops at 85%.:

    Kindly go to Settings >> General Settings >> And changed the site addresses to https.

    Regards,
    Brad

    #237697
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    It is already set to https://

    #237698
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    It is still stopping at 85%

    #237699
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    Kindly send us your URL of the site and WordPress admin details (Username & Password) via email:[email protected]

    We’ll check and revert back to you.

    Regards,
    Brad

    #237704
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    We tested the Fishy theme with PHP 8.4.16, and it is working fine. We did not find any issues with the theme itself.

    However, we found a mixed content issue caused by a mismatch between HTTPS and HTTP URLs.
    As shown in the attached screenshot, the image URL is using http:// while the site URL is using https://. This creates a mixed content issue, which is why the page loading process gets stuck at around 85%.

    To resolve this issue, please either:

    Re-upload all images through the editor so they use HTTPS URLs,
    or
    Install and activate this plugin: https://wordpress.org/plugins/wp-force-ssl/

    This should resolve the issue.

    Kindly see the screenshots:
    https://ibb.co/Qjb7Z9wb

    Regards,
    Brad

    #237709
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    I installed the WP Force SSL, and to repair the image URL issue, you have to pay for the plugin. I installed another plug-in, which I used to repair this issue on another site called SSL Insecure Content Fixer. I even did a find-and-replace to replace HTTP: with HTTPS: to make sure the code is updated. After all of this, I cleared the cache and attempted to edit this page on two separate browsers. It still just stops at 85%, and I can not edit the page.

    I cannot swap out the images because I cannot access the page to edit it, as the SKT Builder does not open. I even tried editing on my cell phone, with no luck.

    After we repair this issue, I noticed the format on the home page is all stretched. See Image

    https://ibb.co/LzNHCr4c

    I need this to function, as I can not update this page at all. I even tried to open a blank page with the builder, and it freezes on 85%. If you need to log in, I’ve already emailed you the login information. Reply: #237368

    #237712
    Sonal S SinhaSonal S Sinha
    Moderator
    • Topics: 0
    • Replies: 31745
    • Total: 31745
    Member since: August 16, 2013

    Hi,

    Kindly use this CSS to resolved mobile issue.

    @media screen and (max-width:479px) {
    .skt-builder-columns-row-4column .skt-builder-column { width: 100% !important;}
    }

    Regards,
    Brad

    #237721
    Langer Enterprises LLCLanger Enterprises LLC
    Participant
    • Topics: 62
    • Replies: 212
    • Total: 274
    Member since: November 25, 2016

    That worked for the mobile issue, but I still can not edit using the SKT Builder. It still gets to 85% and freezes.

    I need this to work ASAP, as I cannot update the home page until a solution is provided for this problem.

Viewing 15 posts - 1 through 15 (of 18 total)
  • You must be logged in to reply to this topic.